Three steps to connect your vmware to eve-ng:
1-connect you physical pc to the eve by adding management cloud in EVE. So, the physical pc will reach the network device in the eve if they are from the same range of ip addresses.
2- make sure your Vmware NIC in bridged mode.
3-configure ip addresses for the physical pc, vmware machine, and the network device- in eve that connected to the cloud - in the same subnet.
The following video show you how to connect eve-ng to vm or how to connect vmware to eve-ng.
Configure Cisco Extended ACL/ Extended Numbered Access Control
List ACL Using Packet Tracer https://youtu.be/j0CDNAa2Wqg Port Forwarding and Static Nat on Cisco Routers - Access your private
network from the internet https://youtu.be/8WVWoW86Uhw Configure Cisco Named Standard Access Control List ACL on Cisco routers https://youtu.be/u2zmuRZazFw
How Access List works - Numbered Standard Access List configuring https://youtu.be/rLci6mFg2BA
Cisco router WAN Redundancy/WAN Failover and Change Routing dynamicaly Using IP
SLA - Route Tracking https://youtu.be/x3xZhbrX7Ww
Cisco Named Access Control Lists Editing (add and delete individual
lines+resequence) https://youtu.be/RToV6h2rGeM
Connecting GNS3 to Vmware
Keywords:
Connect EVE-NG to Vmware
Connect eve-ng to real network
connect eve-ng to internet
connect eve-ng to external network
connect eve-ng to real network
connect eve-ng to cloud
connect eve-ng to internet
connect eve-ng to vmware
connect vmware to eve-ng
connect vm to eve-ng
eve-ng connect to physical network
eve-ng connect two nodes
add vm to eve-ng
config eve-ng
To copy files from your local pc to to a qemu node (Windows/linux) host on eve, you should make your local machine and the eve host machine in the same network and they can reach to each other. make sure no firewall prevent them to access each other. Then, create a sharing folder on you local machine and access this folder from the eve-ng host.
The eve host connected to your local pc on eve by connecting them by cloud node, or by connecting the cloud and the eve-ng host to a switch. If you are using Cisco switch make sure to type the command spanning-tree bpdufilter enable on the interface of the switch that connected to the cloud.
The following video show exactly step by step how to do that
Keywords:
How to copy files from local machine to eve windows 7
How to copy files from local machine to eve windows 10
How to copy files from local machine to eve windows server 2012
How to copy files from local machine to eve windows server 2016
How to copy files from local machine to eve linux
copy a file from local machine to eve host machine
how to connect your local pc to eve host
how to add windows on eve-ng
how to add linux machine on eve-ng
copy files from local machine to remote server
copy files from local machine to ssh
copy files from local machine to windows server
copy files from local machine to citrix
copy files from local machine to vm
copy files from local machine to rdp
copy files from local machine to azure vm
copy files from local machine to virtual box
In this article will demonstrate on how to add windows server 2012 r2 to eve-ng. the same way to add windows server 2008 and 2016 to eve-ng.
1-create a folder using the following command
mkdir /opt/unetlab/addons/qemu/winserver-2012r2/
2-use winscp, filezilla, or any program to copy the windows iso image to the following path: /opt/unetlab/addons/qemu/winserver-2012r2/
3-navigate inside the path:/opt/unetlab/addons/qemu/winserver-2012r2/ and change the image file name to cdrom.iso. in my case my image file name is Windowsserver2012r2_64, using the following command:
mv Windowsserver2012r2_64_Bit.iso cdrom.iso
4-create a new virtual harddisk with at lease 60GB size using the following command: /opt/qemu/bin/qemu-img create -f qcow2 virtioa.qcow2 60G
5-create new lab and add windows node, edit the node and set the qemu version to 2.2.0 and NIC to e1000, then start your machine. During the installation will not view the hard disk to install the windows, so click on load driver and choose FDD B/storage/2003R2/AMD64 or x86. After that will continue the installation to the end. Shutdown your windows properly from start menu inside the windows.
6-Commit the installation to set it as the default image for further use in EVE-NG, such as the following but you must change the values in the following command as shown below
cd /opt/unetlab/tmp/0/3491e0a7-25f8-46e1-b697-ccb4fc4088a2/8/
0:nod number: get it from EVE-usernamangment
3491e0a7-25f8-46e1-b697-ccb4fc4088a2:UIDD/ get it from lab detail
8:NodeID/get from by right click on the windows icon you will find win(Number)
Then type the following command
/opt/qemu/bin/qemu-img commit virtioa.qcow2
7-delete cdrom.iso from /opt/unetlab/addons/qemu/winserver-2012r2/
cd /opt/unetlab/addons/qemu/winserver-2012r2/
rm -f cdrom.iso
One of the reasons of the error message in eve:eve maximum nodes reached (128) is because your hard disk is full and no more free spcace on the hdd. To see the usage of your hard disk, type the command df -h
If you found the free space is 0 GB, shutdown your machine using the following command shutdown -h now
Then, add new hard disk. It's recommended to add new hard disk not to expand the existing one, the eve will see both of you hard disks as one hard. to make sure after adding the new hard, type the command: df -h
The following video show how to fix the issue Maximum nodes reached (128) by adding new hard drive to eve-ng.
Keywords:
unable to add node on eve-ng
can't add node on eve-ng
can't add node to eve
how to add node on eve
hard disk is full on eve
how to add hard disk on eve without corruption of data
how to expand hdd on eve-ng
how to add hard disk on eve-ng
no more free space on eve-ng
How to add hard drive to eve-ng
how to extend eve hard disk space
eve hard disk free space is 0
eve disk space run out