NetSysHorizon: 2019

Saturday, October 26, 2019

How to add the firepower Management Center FMC to eve-ng

In this article will demonstrate how to add the firepower Management Center (FMC) image to eve-ng by using the following steps:

1- download the FMC and FTD images using the following link
https://drive.google.com/open?id=1vc__H79BHmANWHGNgUXEL7XgdktLXm7F
https://drive.google.com/open?id=1Z5fmm-3-Lyb8Zw6NfUPaYScf-sXGsCVr
2-create a directory using the following path
mkdir /opt/unetlab/addons/qemu/firepower6-FMC-6.3.0-83
Note that the version of the ftd used is:6.3.0-83

3-copy the file(.qcow2) of the FMC to the directory created in step number1 using scp or filezilla

4-save the configuration by fixing the permissions using the following command
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

The following video show you the practical steps to add FMC to eve

How to add Cisco Firepower Threat Defense FTD to EVE-NG

In this article will demonstrate how is the adding if firepower Threat Defense (FTD) image to eve-ng by using the following steps:

1- download the FTD image using the following link
https://drive.google.com/open?id=1vc__H79BHmANWHGNgUXEL7XgdktLXm7F
2-create a directory using the following path
mkdir /opt/unetlab/addons/qemu/firepower6-FTD-6.3.0-83
Note that the version of the ftd used is:6.3.0-83

3-copy the file(sscsia.qcow2) of the FTD to the directory created in step number1 using scp or filezilla

4-save the configuration by fixing the permissions using the following command
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

The following video show you the practical steps to add FTD to eve-ng

How to add Firepower NGIPS to EVE-NG

In this article will demonstrate how is the adding if firepower NGIPS image to eve-ng by using the following steps:
1- Download the firepower NGIPS image using the following link
https://drive.google.com/open?id=1fF3OPxwNBppQUqNx6kT-Tt-6gBec8q3H
2-create a directory using the following path
mkdir /opt/unetlab/addons/qemu/firepower6-NGIPS-6.2.3

3-copy the file(sscsia.qcow2) of the NGIPS to the directory created in step number1 using scp or filezilla

4-save the configuration by fixing the permissions using the following command
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

The following video show you the practical steps to add ngips to eve

keywords:

EVE-NG Configure static ip addresses for multiple interfaces

Make Secure CRT open in new tabs Not new windows When using EVE-NG

Configure eve ng to use securecrt / eve-ng securecrt not working

How to add the firepower Management Center FMC to eve-ng

How to add Cisco Firepower Threat Defense FTD to EVE-NG

How to add Firepower NGIPS to EVE-NG

How to add Cisco IPS to EVE-NG

Connect EVE-NG to Vmware / Connect eve-ng to real network

How to copy files from local machine to eve host

windows/linuxHow to add windows server 2008 2012 2016 to eve-ng

EVE-NG Maximum nodes reached (128) error fix / Add new hard drive to eve-ng

EVE how to add windows host to EVE-NG / Create windows machine on EVE-NG

How to add Linux host on EVE-NG

How to upgrade my EVE - Update EVE-NG

How to backup your labs in EVE-ng / EVE backup contents

What is the default username and password in EVE-NG

CLI/WEBEVE Shutdown Command - EVE Reboot command - EVE-ng Graceful Shutdown

How to add cisco ASA to EVE using Qemu ASA

Add IOU/IOL images to eve-ng / how to add cisco routers and switches to eve

Configure ip dns trace telnet to specific port using VPC

GNS3/EVE

How To add Fortinet Fortigate to Eve-ng

How to add Cisco IPS to EVE-NG

In this article will demonstrate on how to add cisco intrusion prevention System (IPS) to eve-ng. the version of the ips image used is 7.1.

Steps:
1-create a directory using the following path
mkdir /opt/unetlab/addons/qemu/cips-7.1

2-copy the files (hda.qcow2 and hdb.qcow2) of the IPS to the directory created in step number 1 using winscp or filezilla

3-save the configuration by fixing the permissions using the following command
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

The following short video show you how is the adding of cips to eve:

Friday, October 11, 2019

How to add Paloalto image to EVE-ng / Adding palo alto to EVE-NG

In this article will demonstrate on how to add paloalto 7 firewall image to eve. Follow the following steps:
1- download the image from the following link
https://drive.google.com/open?id=1lK6RBcjupHIA8xjwxxy7ze3_FjhJWUOZ

2-create a directory in eve using the name:paloalto-7.0.1 using the following command on eve:
mkdir /opt/unetlab/addons/qemu/paloalto-7.0.1

3-upload the file downloaded by the link above (It's name must be: virtioa.qcow2) to eve path /opt/unetlab/addons/qemu/paloalto-7.0.1 By using any program such as winscp

4-save the configuration by fixing the permissions using the foolowing command on eve
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

5- Enjoy using paloalto firewall. The username and password are admin/admin, enter the user and password again and again if its not login successfully first time. You might enter the user and password three times.

This short video shows you step by step how to add palo alto firewall image to the eve-ng

To download the images of EVE
send an email to tsallout@gmail, the address of the email eve-images

keywords:
paloalto image download link
paloalto 7 image download link

paloalto 8 image download link

paloalto 9 image download link

How to install palo alto firewall
How to configure palo alto firewall
palo alto networks firewall
configuration of palo alto firewall
palo alto networks 2019
palo alto networks 2020
Basic config paloalto firewall
Adding palo alto image to EVE-NG
paloalto image link download
https://drive.google.com/open?id=1lK6RBcjupHIA8xjwxxy7ze3_FjhJWUOZ
Steps:
1-copy the image file to this path
mkdir /opt/unetlab/addons/qemu/paloalto-7.0.1
2-fix the permissions
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
palo alto imaging
palo alto image download link free
palo alto image 7.0.1
palo alto image 8
palo alto image 9
Add palo alto to solarwinds
Add palo alto to panorama
Add palo alto to prtg
Add palo alto to gns3
Add palo alto vm to gns3
download palo alto vm
download palo alto software
download palo alto ova

Saturday, September 28, 2019

Learn EVE-NG in minutes - Emulate Cisco Fortinet Paloalto Juniper Devices

The following playlist contains many short educational videos about EVE. These videos are short and simple.

Learn EVE-ng in minutes- The simplest Emulator for different network devices :cisco fortinet paloalto dell mikrotik juniper...

https://www.youtube.com/playlist?list=PLiN9Wu763U6WcbKN4r2O1gYVuQJSlzWBI

https://www.youtube.com/playlist?list=PLiN9Wu763U6WcbKN4r2O1gYVuQJSlzWBI

Navigate to this blog articles to see some subjects in EVE which are not existing in the playlist.
http://netsyshorizon.blogspot.com/search/label/EVE

Tuesday, September 17, 2019

Connect EVE-NG to Vmware / Connect eve-ng to real network

Three steps to connect your vmware to eve-ng:
1-connect you physical pc to the eve by adding management cloud in EVE. So, the physical pc will reach the network device in the eve if they are from the same range of ip addresses.
2- make sure your Vmware NIC in bridged mode.
3-configure ip addresses for the physical pc, vmware machine, and the network device- in eve that connected to the cloud - in the same subnet.

The following video show you how to connect eve-ng to vm or how to connect vmware to eve-ng.

To get automatic updates on your facebook, join a facebook group
https://www.facebook.com/groups/netsyshorizon/
To get automatic updates on your youtube guide, subscribe to the channel
http://www.youtube.com/channel/UCl25WPPKY4jnkGf32DnXU5

Related Links:

How to copy files from local machine to eve host windows or linux

https://youtu.be/5AFRY1XmygE

EVE-NG Maximum nodes reached (128) Fix error / Add new hard drive to eve-ng

https://youtu.be/lkYpVKp9PQ4

EVE Chnage ip address of eve-ng / configure eve ip address dns gateway

https://youtu.be/-ghPQ8swKWI

How to configure cisco router as DNS server

https://youtu.be/ehGQkafqdNg

EVE How to add cisco asa to eve-ng - Cisco Qemu ASA to EVE

https://youtu.be/POUai35fBBo

Adding Cisco Routers and Switches to EVE by adding IOU/IOL images to EVE

https://youtu.be/STD_ybhhFhs

configure ip ping ip trace telnet port using VPC EVE and VPC GNS3

https://youtu.be/8cA_ArSoOQM

CUCM UNITY IM and Presence Memory Usage / Utilization command

https://youtu.be/kwYk7wEBmmk

configure cisco router as ntp server and as ntp client

https://youtu.be/mMaBVNo1gKg

configure cisco router as dhcp server / cisco ios dhcp configuration
https://youtu.be/a-ajvu86ZGE
Cisco ios dhcp reservation and Cisco dhcp lease release
https://youtu.be/hTduy8_YDTY
Cisco dhcp lease time hours / Cisco dhcp lease time infinite
https://youtu.be/tpYIe6KSlcI
CUCM IP Phone Registration and Configuration and make a call between two ip phones
https://youtu.be/bXvtDY2O7JM
Make a bootable CUCM image from a non bootable iso file / Cisco bootable iso
https://youtu.be/pfH1HzVYowE
NBMA Network Broadcast Network Point-to-Point Network
https://youtu.be/yHIkJ-jOJHM
Difference Between Network and Internetwork / Network Types LAN MAN WAN
https://youtu.be/pGIkjYf9wC8
EIGRP Metric Calculation and Configuring different Delay and Bandwidth values
https://youtu.be/zgqaVkQe5Sw
Telnet Vs SSH - Difference betweenTelnet and SSH Configuration
https://youtu.be/15pfENww-dk
Configure DHCP on Cisco router - Cisco router as a DHCP Server
https://youtu.be/YTCgVn9X4ac
SSH from cisco router and switch to another
https://youtu.be/_I-0Vgc8E9s

Assign ip address to cisco switch / Assign ip address to vlan
https://youtu.be/Q9SUVmyJr80
OSPF Cost Calculation and Configuring Bandwidth/ip ospf cost/reference bandwidth
https://youtu.be/zgqaVkQe5Sw
EIGRP Composite Metric Calculation and Configuring different delay values and Bandwidth values
https://youtu.be/GsnV4Bc3On8
Configure / Assign IP address to Cisco Layer 3 Switch
https://youtu.be/s9DMZCq27Ys
Configuring cisco extended acl / extended named access control list tutorial using packet tracer
https://youtu.be/Tj6H8pg06f0

Monday, September 9, 2019

How to copy files from local machine to eve host windows/linux

To copy files from your local pc to to a qemu node (Windows/linux) host on eve, you should make your local machine and the eve host machine in the same network and they can reach to each other. make sure no firewall prevent them to access each other. Then, create a sharing folder on you local machine and access this folder from the eve-ng host.

The eve host connected to your local pc on eve by connecting them by cloud node, or by connecting the cloud and the eve-ng host to a switch. If you are using Cisco switch make sure to type the command spanning-tree bpdufilter enable on the interface of the switch that connected to the cloud.

The following video show exactly step by step how to do that

Keywords:
How to copy files from local machine to eve windows 7
How to copy files from local machine to eve windows 10
How to copy files from local machine to eve windows server 2012
How to copy files from local machine to eve windows server 2016
How to copy files from local machine to eve linux
copy a file from local machine to eve host machine
how to connect your local pc to eve host
how to add windows on eve-ng
how to add linux machine on eve-ng
copy files from local machine to remote server
copy files from local machine to ssh
copy files from local machine to windows server
copy files from local machine to citrix
copy files from local machine to vm
copy files from local machine to rdp
copy files from local machine to azure vm
copy files from local machine to virtual box

Related Links:

How to copy files from local machine to eve host windows or linux

https://youtu.be/5AFRY1XmygE

EVE-NG Maximum nodes reached (128) Fix error / Add new hard drive to eve-ng

https://youtu.be/lkYpVKp9PQ4

EVE Chnage ip address of eve-ng / configure eve ip address dns gateway

https://youtu.be/-ghPQ8swKWI

How to configure cisco router as DNS server

https://youtu.be/ehGQkafqdNg

EVE How to add cisco asa to eve-ng - Cisco Qemu ASA to EVE

https://youtu.be/POUai35fBBo

Adding Cisco Routers and Switches to EVE by adding IOU/IOL images to EVE

https://youtu.be/STD_ybhhFhs

configure ip ping ip trace telnet port using VPC EVE and VPC GNS3

https://youtu.be/8cA_ArSoOQM

CUCM UNITY IM and Presence Memory Usage / Utilization command

https://youtu.be/kwYk7wEBmmk

configure cisco router as ntp server and as ntp client

https://youtu.be/mMaBVNo1gKg

Configure Cisco Extended ACL/ Extended Numbered Access Control List ACL Using Packet Tracer
https://youtu.be/j0CDNAa2Wqg
Port Forwarding and Static Nat on Cisco Routers - Access your private network from the internet
https://youtu.be/8WVWoW86Uhw
Configure Cisco Named Standard Access Control List ACL on Cisco routers
https://youtu.be/u2zmuRZazFw
How Access List works - Numbered Standard Access List configuring
https://youtu.be/rLci6mFg2BA
Cisco router WAN Redundancy/WAN Failover and Change Routing dynamicaly Using IP SLA - Route Tracking
https://youtu.be/x3xZhbrX7Ww
Cisco Named Access Control Lists Editing (add and delete individual lines+resequence)
https://youtu.be/RToV6h2rGeM
Connecting GNS3 to Vmware
https://youtu.be/WuLf3ESAx94
How to download and install GNS3 1.2 + adding IOS image to GNS3
https://youtu.be/CXVNpERIPo4
Mikrotik router PPPoE client configuration - Mikrotik PPPoE client Setup
https://youtu.be/aUGL20rjbVA
Add IOS images to GNS3
https://youtu.be/GjxODWeuC5Y
Connect your PC to GNS3 - connecting GNS3 to local machine
https://youtu.be/c_b_-rGWnJc
Configuration register value - changing the configuration register
https://youtu.be/YVAKerOmJpk
Backup and Restore Cisco Configuration file - Cisco backup Config
https://youtu.be/YMX1EMPjBC0
Capture telnet password using wireshark - Sniffing telnet password using wireshark
https://youtu.be/xShwyUq-uHk
Clock Rate vs Bandwidth - Configuring clock rate and bandwidth
https://youtu.be/rntsm5bHagI
Configure Default routes on cisco routers
https://youtu.be/E5-kpZt8LU4
Configure cisco router hostname and ip address
https://youtu.be/1OYMlMzQ1dE
Cisco Router Password Recovery
https://youtu.be/6shdtrAx9l0
Static Routing Configuration Using Packet Tracer
https://youtu.be/v05Jm4h-Zms I
NSTALL and FIX CISCO VPN CLIENT ON WINDOWS 10 / FIX REASON 442 FAILED TO ENABLE VIRTUAL ADAPTER
https://youtu.be/9jp2EmiOMwQ
Remote desktop connection error due to credssp encryption oracle remediation
https://youtu.be/LkccEQPUYME
INSTALL and FIX CISCO VPN CLIENT ON WINDOWS 10 / FIX REASON 442 FAILED TO ENABLE VIRTUAL ADAPTER
https://youtu.be/9jp2EmiOMwQ
Connect GNS3 to Vmware 2019 / Adding Virtual Machines to the GNS3 Topology 2019
https://youtu.be/NVom_wG8t3o
How to Add Hibernate Shortcut to the Windows 10 Start Menu
https://youtu.be/umxSphM_VnY
GNS3 Error could not bind with WinError 10049 The requested address is not valid in its context
https://youtu.be/wMmd2_RBLYQ
Assign ip address mikrotik router interface
https://youtu.be/bFTnUCXtGmI
how to block website mikrotik / mikrotik website blocking / mikrotik website filtering
https://youtu.be/dNswOyvLT4w
Mikrotik default password / Mikrotik default ip address / mikrotik default username
https://youtu.be/xMu52KIjsn0

Friday, September 6, 2019

How to add windows server 2008 2012 2016 to eve-ng

In this article will demonstrate on how to add windows server 2012 r2 to eve-ng. the same way to add windows server 2008 and 2016 to eve-ng.
1-create a folder using the following command
mkdir /opt/unetlab/addons/qemu/winserver-2012r2/

2-use winscp, filezilla, or any program to copy the windows iso image to the following path: /opt/unetlab/addons/qemu/winserver-2012r2/

3-navigate inside the path:/opt/unetlab/addons/qemu/winserver-2012r2/ and change the image file name to cdrom.iso. in my case my image file name is Windowsserver2012r2_64, using the following command:
mv Windowsserver2012r2_64_Bit.iso cdrom.iso

4-create a new virtual harddisk with at lease 60GB size using the following command: /opt/qemu/bin/qemu-img create -f qcow2 virtioa.qcow2 60G

5-create new lab and add windows node, edit the node and set the qemu version to 2.2.0 and NIC to e1000, then start your machine. During the installation will not view the hard disk to install the windows, so click on load driver and choose FDD B/storage/2003R2/AMD64 or x86. After that will continue the installation to the end. Shutdown your windows properly from start menu inside the windows.

6-Commit the installation to set it as the default image for further use in EVE-NG, such as the following but you must change the values in the following command as shown below
cd /opt/unetlab/tmp/0/3491e0a7-25f8-46e1-b697-ccb4fc4088a2/8/
0:nod number: get it from EVE-usernamangment
3491e0a7-25f8-46e1-b697-ccb4fc4088a2:UIDD/ get it from lab detail
8:NodeID/get from by right click on the windows icon you will find win(Number)
Then type the following command
/opt/qemu/bin/qemu-img commit virtioa.qcow2

7-delete cdrom.iso from /opt/unetlab/addons/qemu/winserver-2012r2/
cd /opt/unetlab/addons/qemu/winserver-2012r2/
rm -f cdrom.iso

Enjoy using the Windows !!

Related Links:

How to copy files from local machine to eve host windows or linux

https://youtu.be/5AFRY1XmygE

EVE-NG Maximum nodes reached (128) Fix error / Add new hard drive to eve-ng

https://youtu.be/lkYpVKp9PQ4

EVE Chnage ip address of eve-ng / configure eve ip address dns gateway

https://youtu.be/-ghPQ8swKWI

How to configure cisco router as DNS server

https://youtu.be/ehGQkafqdNg

EVE How to add cisco asa to eve-ng - Cisco Qemu ASA to EVE

https://youtu.be/POUai35fBBo

Adding Cisco Routers and Switches to EVE by adding IOU/IOL images to EVE

https://youtu.be/STD_ybhhFhs

configure ip ping ip trace telnet port using VPC EVE and VPC GNS3

https://youtu.be/8cA_ArSoOQM

CUCM UNITY IM and Presence Memory Usage / Utilization command

https://youtu.be/kwYk7wEBmmk

configure cisco router as ntp server and as ntp client

https://youtu.be/mMaBVNo1gKg

Tuesday, September 3, 2019

EVE-NG Maximum nodes reached (128) error fix / Add new hard drive to eve-ng

One of the reasons of the error message in eve:eve maximum nodes reached (128) is because your hard disk is full and no more free spcace on the hdd. To see the usage of your hard disk, type the command
df -h
If you found the free space is 0 GB, shutdown your machine using the following command
shutdown -h now
Then, add new hard disk. It's recommended to add new hard disk not to expand the existing one, the eve will see both of you hard disks as one hard. to make sure after adding the new hard, type the command: df -h

The following video show how to fix the issue Maximum nodes reached (128) by adding new hard drive to eve-ng.

Keywords:
unable to add node on eve-ng
can't add node on eve-ng
can't add node to eve
how to add node on eve
hard disk is full on eve
how to add hard disk on eve without corruption of data
how to expand hdd on eve-ng
how to add hard disk on eve-ng
no more free space on eve-ng
How to add hard drive to eve-ng
how to extend eve hard disk space
eve hard disk free space is 0
eve disk space run out

Related Links:

How to copy files from local machine to eve host windows or linux

https://youtu.be/5AFRY1XmygE

EVE-NG Maximum nodes reached (128) Fix error / Add new hard drive to eve-ng

https://youtu.be/lkYpVKp9PQ4

EVE Chnage ip address of eve-ng / configure eve ip address dns gateway

https://youtu.be/-ghPQ8swKWI

How to configure cisco router as DNS server

https://youtu.be/ehGQkafqdNg

EVE How to add cisco asa to eve-ng - Cisco Qemu ASA to EVE

https://youtu.be/POUai35fBBo

Adding Cisco Routers and Switches to EVE by adding IOU/IOL images to EVE

https://youtu.be/STD_ybhhFhs

configure ip ping ip trace telnet port using VPC EVE and VPC GNS3

https://youtu.be/8cA_ArSoOQM

CUCM UNITY IM and Presence Memory Usage / Utilization command

https://youtu.be/kwYk7wEBmmk

configure cisco router as ntp server and as ntp client

https://youtu.be/mMaBVNo1gKg